| |
||
|
Getting a wheelchair into a car (view report contents)RampsPortable ramps hook on the back of the vehicle and are carried in the
boot. You push the wheelchair up the ramp, or run it up under its own
power if it is electric. They are a (comparatively) cheap way of getting
a wheelchair into a car if you have the dexterity and a large enough vehicle.
![]() A folding ramp. From about £400 ![]() A telescopic ramp. From about £250 Some have carrying handles so that they can be lugged fairly easily by an able bodied person. Check that there is enough room to get them in the car easily when the wheelchair is loaded. Make sure that the channel is wide enough to allow the castors to turn. Ramps need to be secure. Some have pins which slot into locating holes drilled into the vehicle floor - recommended. Also make sure the ramp is secured for the journey. If you have a three wheeled scooter you need a wide ramp or three channel ramps. Look for channels which are wide enough to take the wheels easily. Check that the side guards are high enough to stop the chair from falling and that they do not catch the underside of the chair when you are pushing it up. ![]() A wide ramp. About £400 A broad flat ramp suitable for scooters or wheelchairs which unfolds by power is available from Reselco. It can only be fitted to MPVs. The ramp folds up against the rear door when not in use, standing some 76cm high, so it should not obstruct the driver’s rear view. It costs from around £800 for a manual version to £1,600 for automatic operation with remote control. Report ContentsIntroduction
Ramps |
|
| Home | About us | Research services | Reports | Ordering | Links | Site map | ||
|